Updating GCM16, GCM32 (1754D1X, 1754D2X) firmware. Visit http://www.ibm.com/support/fixcentral/and download the latest FLASH firmware from IBM. Save the FLASH upgrade file to the appropriate directory on the TFTP server. To upgrade the switch firmware: 1. From the side navigation bar, select Unit View > Appliance > Overview to open the Unit Overview window. 2. Click Upgrade Firmware to open the Upgrade Appliance Firmware. 3. Select one of the following options from which to load the firmware file: File System, TFTP, FTP, or HTTP. NOTE: The File System option is only available on the remote OBWI . 4. If you selected File System, select Browse to specify the location of the firmware upgrade file. -orIf you selected TFTP, enter the Server IP Address and Firmware File you wish to load. -orIf you selected FTP or HTTP, enter the Server IP Address and Firmware File you wish to load, as well as the User Name and User Password. 5. Click Upgrade. After the Flash memory is reprogrammed with the upgrade, the switch performs a soft reset, which terminates all CO cable sessions. A target device experiencing a CO cable firmware update may not display, or may display as disconnected. The target device will appear normally when the Flash update is completed. Attention: Disconnecting a CO cable during a firmware update or cycling power to the target device will render the module inoperable and require the CO cable to be returned to the factory for repair. IBM UPS Manager ReadMe IBM UPS Manager (version 01.16.0001) for Windows IBM UPS Manager (version 01.14.0002) for Red Hat Enterprise Linux (RHEL) x86 and x86_64 IBM UPS Manager (version 01.08.0003) Aix and Red Hat Enterprise Linux (RHEL)PowerPC ------------------- Company Information ------------------- IBM North America 590 Madison Avenue New York, NY 10022 United States Toll Free: 1-800-426-7378 International: 1-919-872-3020 http://www.ibm.com/planetwide/ ----------------- Table of Contents ----------------- 1.0 Product Description 2.0 System Requirements 3.0 Before You Install - General 3.1 RHEL related Notes 4.0 Installation on Windows 4.1 Before You Install 4.2 Windows Standard Install procedure 4.3 Compatibility with Windows XP Service Pack 2 5.0 Installation on RHEL 5.1 Before You Install 5.2 Installation 6.0 Additional Instructions for RHEL 6.1 Start IBM UPS Manager on a RHEL system 6.2 Stop the Power Monitor 6.3 Uninstall IBM UPS Manager 7.0 Installation on AIX 7.1 Before You Install 7.2 AIX Install 8.0 Getting Started

posted by Isaac Hobart at 4:44 PM

0 Comments:

Post a Comment

<< Home